Requirements and precautions for making molds for anti-theft door facades
The anti-theft door facade mold is a better-used product, which can make the anti-theft door look more beautiful and make consumers more satisfied when buying it. However, in order to make a good facade product, make the facade mold The medium requirements will be even higher. Some requirements should be paid attention to. For details, please follow Xingyu's facade to find out.
Mold structure design and parameter selection must consider factors such as rigidity, guidance, unloading mechanism, positioning method, gap size, etc. The wearing parts on the mold should be easy to replace. For plastic molds and die-casting molds, it is also necessary to consider a reasonable pouring system, molten plastic or metal flow state, and the position and direction of entering the cavity. In order to improve productivity and reduce the loss of runner pouring, a multi-cavity mold can be used, and multiple identical or different products can be completed simultaneously in one mold. High-efficiency, high-precision, and long-life molds should be used in mass production.
The stamping die should adopt a multi-station progressive die, and a cemented carbide insert progressive die can be used to increase the life. In small batch production and trial production of new products, simple molds with simple structure, fast manufacturing, and low cost should be used, such as combined die, sheet die, polyurethane rubber die, low melting point alloy die, zinc alloy die, superplastic alloy die, etc. Molds have begun to use computer-aided design (CAD), that is, to optimize the design of molds through a set of computer-centric systems.
This is the goal of many facade mold manufacturers, and it is also the goal of Xingyu. If you don’t know what aspects of our products, you can read more about the relevant consultation. There are various anti-theft door facades, cast aluminum door facades, interior door facades, and facade doors waiting for your order.
Mold structure design and parameter selection must consider factors such as rigidity, guidance, unloading mechanism, positioning method, gap size, etc. The wearing parts on the mold should be easy to replace. For plastic molds and die-casting molds, it is also necessary to consider a reasonable pouring system, molten plastic or metal flow state, and the position and direction of entering the cavity. In order to improve productivity and reduce the loss of runner pouring, a multi-cavity mold can be used, and multiple identical or different products can be completed simultaneously in one mold. High-efficiency, high-precision, and long-life molds should be used in mass production.
The stamping die should adopt a multi-station progressive die, and a cemented carbide insert progressive die can be used to increase the life. In small batch production and trial production of new products, simple molds with simple structure, fast manufacturing, and low cost should be used, such as combined die, sheet die, polyurethane rubber die, low melting point alloy die, zinc alloy die, superplastic alloy die, etc. Molds have begun to use computer-aided design (CAD), that is, to optimize the design of molds through a set of computer-centric systems.
This is the goal of many facade mold manufacturers, and it is also the goal of Xingyu. If you don’t know what aspects of our products, you can read more about the relevant consultation. There are various anti-theft door facades, cast aluminum door facades, interior door facades, and facade doors waiting for your order.
